Task 1:
For reference information on configuring hostnames, please refer to:
Lab 35 Configuration and Verification Task 1
Task 2:
For reference information on configuring DCE clocking, please refer to:
Lab 57 Configuration and Verification Task 2
Lab 58 Configuration and Verification Task 2
Task 3:
R3#conf t
Enter configuration commands, one per line. End with CNTL/Z.
R3(config)#logging on
R3(config)#logging buffered informational
R3(config)#end
R3#
NOTE: When configuring logging, it is always good practice to enable logging with the logging on command. When logging messages to the buffer on the router, the options . . .
The content below this message is for members only.