Figure 1:
Frame Relay Physical Lab Cabling
Frame Relay Switch Configuration
| hostname FR-SWITCH ! frame-relay switching ! interface serial0/0 description ‘Connected to R1 Serial0/0’ encapsulation frame-relay frame-relay intf-type dce frame-relay route 111 interface serial0/1 222 clock rate 256000 no shutdown ! interface serial0/1 description ‘Connected to R2 Serial0/0’ encapsulation frame-relay frame-relay intf-type dce frame-relay route 222 interface serial0/0 111 clock rate 256000 no shutdown ! end |
| NOTE: This Frame Relay Switch configuration is based on the configuration of a Cisco 2610 IOS router with two Serial interfaces. The router is running a basic Enterprise IOS image. |