Task 1 Hints & References
For reference information on configuring hostnames, please refer to:
Lab 21 Configuration and Verification Task 1
Lab 35 Configuration and Verification Task 1
Task 2 Hints & References
For reference information on configuring standard VLANs, please refer to:
Lab 1 Configuration and Verification Task 1
Lab 1 Configuration and Verification Task 2
Lab 2 Configuration and Verification Task 2
Lab 3 Configuration and Verification Task 1
Task 3 Hints & References
For reference information on configuring IP interfaces, please refer to:
Lab 31 Configuration and Verification Task 3
Lab 56 Configuration and Verification Task 2
Task 4 Hints & References
Your EIGRP configuration on R2 would be:
router eigrp 254
no auto-summary
network 192.168.1.0 0.0.0.7
If you did not use the wildcard mask, EIGRP would advertise the entire 192.168.0.0/16 network, which would include the 192.168.2.0/27 subnet. Since that is prohibited in the lab, you must use the EIGRP wildcard mask.
For reference information wildcard masks, please refer to:
Lab 42 Configuration and Verification Task 5
Lab 48 Configuration and Verification Task 3
For reference information on enabling EIGRP, please refer to:
Lab 41 Configuration and Verification Task 4
Lab 42 Configuration and Verification Task 5
Lab 44 Configuration and Verification Task 5
Task 5 Hints & References
Your summary address configuration for this task would be as follows:
interface Serial0/0
ip summary-address eigrp 254 10.10.0.0 255.255.252.0
You need to be comfortable summarizing IP addresses. Practice makes perfect!
For reference information on RIPv2 and EIGRP route summarization, please refer to:
Lab 39 Configuration and Verification Task 6
Lab 45 Configuration and Verification Task 5
Task 6 Hints & References
You need to use the ip nat inside source static command to complete this task.
For reference information on configuring NAT, please refer to:
Lab 65 Configuration and Verification Task 6
Lab 66 Configuration and Verification Task 8
Lab 67 Configuration and Verification Task 7
Task 7 Hints & References
For reference information on using standard PING, please refer to:
Lab 15 Configuration and Verification Task 6