www.howtonetwork.org

CCNA & CCNP Certifcation Training

  • About
  • Contact
  • FAQ
  • Join
  • Home
  • CCNA
    • ICND1
    • ICND2
    • 101 CCNA LABS
  • CCNP
    • ROUTE
    • SWITCH
    • TSHOOT
    • 101 CCNP LABS
  • CompTIA
    • Security+
    • Network+
  • Design
    • CCDA
    • CCDP
You are here: Home / 101 CCNA LABS / Cisco Router and Security Device Manager Solutions / Lab 89 Solution: Using Cisco SDM to configure DNS servers

Lab 89 Solution: Using Cisco SDM to configure DNS servers

Task 1:

For reference information on configuring hostnames, please refer to:

Lab 35 Configuration and Verification Task 1

Task 2:

For reference information on configuring and verifying VLANs, please refer to:

Lab 1 Configuration and Verification Task 3

Lab 2 Configuration and Verification Task 3

Task 3:

To complete this task you need to navigate to the router properties as follows:

1. On the top menu click on Configure.

2. Under Tasks, click on Additional Tasks.

3. Next, click on DNS

4. Click on the Add in the top right hand corner.

5. On the DNS Properties pop-up page . . .

The content below this message is for members only.

About Us

This is a free bonus site for members of www.howtonetwork.com

Copyright

The content on this copyright Reality Press Ltd.
Copyright Reality Press Ltd.