www.howtonetwork.org

CCNA & CCNP Certifcation Training

  • About
  • Contact
  • FAQ
  • Join
  • Home
  • CCNA
    • ICND1
    • ICND2
    • 101 CCNA LABS
  • CCNP
    • ROUTE
    • SWITCH
    • TSHOOT
    • 101 CCNP LABS
  • CompTIA
    • Security+
    • Network+
  • Design
    • CCDA
    • CCDP
You are here: Home / 101 CCNA LABS / Cisco Router and Security Device Manager Solutions / Lab 92 Solution: Using Cisco SDM to manager users, passwords and privileges

Lab 92 Solution: Using Cisco SDM to manager users, passwords and privileges

Task 1:

For reference information on configuring hostnames, please refer to:

Lab 35 Configuration and Verification Task 1

Task 2:

For reference information on configuring and verifying VLANs, please refer to:

Lab 1 Configuration and Verification Task 3

Lab 2 Configuration and Verification Task 3

To complete this task you need to navigate to the router properties as follows:

1. On the top menu click on Configure.

2. Under Tasks, click on Additional Tasks.

3. Next, expand the Router Access selection.

4. Click on User Accounts/View

5. On the right hand side, click Add.

6. Enter the username and . . .

The content below this message is for members only.

About Us

This is a free bonus site for members of www.howtonetwork.com

Copyright

The content on this copyright Reality Press Ltd.
Copyright Reality Press Ltd.