www.howtonetwork.org

CCNA & CCNP Certifcation Training

  • About
  • Contact
  • FAQ
  • Join
  • Home
  • CCNA
    • ICND1
    • ICND2
    • 101 CCNA LABS
  • CCNP
    • ROUTE
    • SWITCH
    • TSHOOT
    • 101 CCNP LABS
  • CompTIA
    • Security+
    • Network+
  • Design
    • CCDA
    • CCDP
You are here: Home / 101 CCNA LABS / Cisco Router and Security Device Manager Solutions / Lab 94 Solution: Managing configuration files with Cisco SDM

Lab 94 Solution: Managing configuration files with Cisco SDM

Task 1:

For reference information on configuring hostnames, please refer to:

Lab 35 Configuration and Verification Task 1

Task 2:

For reference information on configuring and verifying VLANs, please refer to:

Lab 1 Configuration and Verification Task 3

Lab 2 Configuration and Verification Task 3

Task 3:

To complete this task you need to navigate to the router properties as follows:

1. On the top menu click on Configure.

2. Under Tasks, click on Additional Tasks.

3. Next, expand the Configuration Management selection.

4. Click on Config Editor. You should now be able to see running-config on the router.

101solutions_fig49

5. Under Edit Configuration, type in the configuration provided for the new Loopback interface

101solutions_fig50

6. Next, click on the Merge with Running Config radio button.

7. Click Yes when asked if you are sure and want to continue.

101solutions_fig51

8. Cisco SDM merges your configuration with that of the current router configuration. It may take a few minutes.

9. Once complete you will get a confirmation message from Console Output that the merge was successful. If you scroll down the running config at this time, you will see your new configuration on the router.

101solutions_fig52

Prev

About Us

This is a free bonus site for members of www.howtonetwork.com

Copyright

The content on this copyright Reality Press Ltd.
Copyright Reality Press Ltd.