Task 1:
For reference information on configuring hostnames, please refer to:
Lab 35 Configuration and Verification Task 1
Task 2:
For reference information on configuring DCE clocking, please refer to:
Lab 20 Configuration and Verification Task 3
Lab 21 Configuration and Verification Task 3
Lab 21 Configuration and Verification Task 2
Lab 35 Configuration and Verification Task 2
Task 3:
R1#conf t
Enter configuration commands, one per line. End with CNTL/Z.
R1(config)#ip route 0.0.0.0 0.0.0.0 serial 0/0 192.168.254.3
R1(config)#end
R1#
R3#conf t
Enter . . .
The content below this message is for members only.