www.howtonetwork.org

CCNA & CCNP Certifcation Training

  • About
  • Contact
  • FAQ
  • Join
  • Home
  • CCNA
    • ICND1
    • ICND2
    • 101 CCNA LABS
  • CCNP
    • ROUTE
    • SWITCH
    • TSHOOT
    • 101 CCNP LABS
  • CompTIA
    • Security+
    • Network+
  • Design
    • CCDA
    • CCDP
You are here: Home / 101 CCNA LABS / IP Routing Solutions / Lab 31 Solution: Configuring Static Routing via Interfaces

Lab 31 Solution: Configuring Static Routing via Interfaces

Task 1:

For reference information on configuring hostnames, please refer to:

Lab 20 Configuration and Verification Task 1

Lab 21 Configuration and Verification Task 1

Task 2:

For reference information on configuring standard VLANs, please refer to:

Lab 2 Configuration and Verification Task 2

Lab 3 Configuration and Verification Task 1

Task 3:

R1#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

R1(config)#int fastether 0/0

R1(config-if)#ip address 172.27.32.1 255.255.224.0

R1(config-if)#no shutdown

R1(config-if)#end

R1#

R1#show ip interface brief . . .

The content below this message is for members only.

About Us

This is a free bonus site for members of www.howtonetwork.com

Copyright

The content on this copyright Reality Press Ltd.
Copyright Reality Press Ltd.