Task 1:
For reference information on configuring hostnames, please refer to:
Lab 35 Configuration and Verification Task 1
Task 2:
For reference information on configuring and verifying VLANs, please refer to:
Lab 1 Configuration and Verification Task 3
Lab 2 Configuration and Verification Task 3
Task 3:
R1#config t
Enter configuration commands, one per line. End with CNTL/Z.
R1(config)#int fa0/0
R1(config-if)#ip add 10.1.1.1 255.255.255.0
R1(config-if)#end
R1#
R2#conf t
Enter configuration commands, one per line. End with CNTL/Z.
R2(config)#int fa0 . . .
The content below this message is for members only.