Task 1:
For reference information on configuring hostnames, please refer to:
Lab 21 Configuration and Verification Task 1
Lab 35 Configuration and Verification Task 1
Task 2:
R1#conf t
Enter configuration commands, one per line. End with CNTL/Z.
R1(config)#int s0/0
R1(config-if)#clock rate 768000
R1(config-if)#encapsulation ppp
R1(config-if)#ip address 172.16.1.1 255.255.255.192
R1(config-if)#no shut
R1(config-if)#end
R1#
R3#conf t
Enter configuration commands, one per line. End with CNTL/Z.
R3(config)#int s0/0
R3(config-if . . .
The content below this message is for members only.