Task 1:
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#hostname R1
R1(config)#end
R1#
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#hostname R2
R2(config)#end
R2#
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#hostname R3
R3(config)#end
R3#
Task 2:
For reference information on verifying Frame Relay mapping, please refer to:
Lab 40 Configuration and Verification Task 4
Lab 40 Configuration and Verification Task 5
R1#show frame-relay map
Serial1/0 (up . . .
The content below this message is for members only.