Lab 53 Solution: Manually configuring the OSPF router ID

Task 1:

Router#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#hostname R1

R1(config)#end

Router#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#hostname R3

R3(config)#end

Task 2:

R1#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

R1(config)#int s0/0

R1(config-if)#clock rate 768000

R1(config-if)#ip address 172.16.1.1 255.255.255.192

R1(config-if)#no shut

R1(config-if)#end

R1#

R3#conf t

Enter configuration commands, one per line . . .

The content below this message is for members only.