www.howtonetwork.org

CCNA & CCNP Certifcation Training

  • About
  • Contact
  • FAQ
  • Join
  • Home
  • CCNA
    • ICND1
    • ICND2
    • 101 CCNA LABS
  • CCNP
    • ROUTE
    • SWITCH
    • TSHOOT
    • 101 CCNP LABS
  • CompTIA
    • Security+
    • Network+
  • Design
    • CCDA
    • CCDP
You are here: Home / 101 CCNA LABS / IP Routing / Lab 051: Configuring OSPF Point-to-Multipoint Networks

Lab 051: Configuring OSPF Point-to-Multipoint Networks

Lab 51:

Configuring OSPF Point-to-Multipoint Networks

Lab Objective:

The objective of this lab exercise is for you to learn and understand how to enable OSPF on Point-to-Multipoint network types. Unlike other OSPF network types, there is no default Point-to-Multipoint network type. This must be manually enabled.

Lab Purpose:

Enabling OSPF on Point-to-Multipoint network types is a fundamental skill. OSPF is the most popular Interior Gateway Protocol (IGP) and it is imperative to understand how OSPF adjacencies are established on Point-to-Multipoint network types. Point-to-Multipoint network types are typically used . . .

The content below this message is for members only.

About Us

This is a free bonus site for members of www.howtonetwork.com

Copyright

The content on this copyright Reality Press Ltd.
Copyright Reality Press Ltd.