www.howtonetwork.org

CCNA & CCNP Certifcation Training

  • About
  • Contact
  • FAQ
  • Join
  • Home
  • CCNA
    • ICND1
    • ICND2
    • 101 CCNA LABS
  • CCNP
    • ROUTE
    • SWITCH
    • TSHOOT
    • 101 CCNP LABS
  • CompTIA
    • Security+
    • Network+
  • Design
    • CCDA
    • CCDP
You are here: Home / 101 CCNA LABS / Local Area Networks Solutions / Lab 14 Solution: Enabling Rapid Per-VLAN Spanning Tree

Lab 14 Solution: Enabling Rapid Per-VLAN Spanning Tree

Task 1:

For reference information on configuring hostnames, please refer to:

Lab 1 Configuration and Verification Task 1

Lab 3 Configuration and Verification Task 1

Task 2:

NOTE: By default, Cisco switches are VTP servers so no configuration is necessary for Server mode on Sw1. This can be verified using the show vtp status command. However, we do need to configure the domain.

For reference information on configuring the VTP Mode, please refer to:

Lab 4 Configuration and Verification Task 2

For reference information on configuring a VTP password, please refer to:

Lab 5 Configuration and Verification

Task 3:

For . . .

The content below this message is for members only.

About Us

This is a free bonus site for members of www.howtonetwork.com

Copyright

The content on this copyright Reality Press Ltd.
Copyright Reality Press Ltd.