Task 1:
For reference information on configuring hostnames, please refer to:
Lab 1 Configuration and Verification Task 1
Lab 3 Configuration and Verification Task 1
Task 2:
For reference information on configuring verifying VLANs, please refer to:
Lab 1 Configuration and Verification Task 3
Lab 2 Configuration and Verification Task 3
For reference information on configuring a VTP password, please refer to:
Lab 5 Configuration and Verification
Task 3:
Sw1#config t
Enter configuration commands, one per line. End with CNTL/Z.
Sw1(config)#interface fastethernet0/1
Sw1(config-if)#switchport mode trunk
Sw1(config-if)#exit
Sw1(config)#vlan . . .
The content below this message is for members only.