Task 1:
For reference information on configuring hostnames, please refer to:
Lab 1 Configuration and Verification Task 1
Lab 3 Configuration and Verification Task 1
Task 2:
Sw1#config t
Enter configuration commands, one per line. End with CNTL/Z.
Sw1(config)#vtp mode transparent
Setting device to VTP TRANSPARENT mode.
Sw1(config)#vtp mode transparent
Sw1(config)#vtp domain CISCO
Changing VTP domain name from Null to CISCO
Sw1(config)#vtp version 1
Sw1(config)#vlan 2010
Sw1(config-vlan)#name SALES
Sw1(config-vlan)#exit
Sw1(config)#vlan 2020
Sw1(config-vlan)#name MANAGERS
Sw1(config-vlan)#exit . . .
The content below this message is for members only.