www.howtonetwork.org

CCNA & CCNP Certifcation Training

  • About
  • Contact
  • FAQ
  • Join
  • Home
  • CCNA
    • ICND1
    • ICND2
    • 101 CCNA LABS
  • CCNP
    • ROUTE
    • SWITCH
    • TSHOOT
    • 101 CCNP LABS
  • CompTIA
    • Security+
    • Network+
  • Design
    • CCDA
    • CCDP
You are here: Home / 101 CCNA LABS / Local Area Networks Solutions / Lab 5 Solution: Securing VTP Domains

Lab 5 Solution: Securing VTP Domains

Task 1:

For reference information on configuring hostnames, please refer to:

Lab 1 Configuration and Verification Task 1

Lab 3 Configuration and Verification Task 1

Task 2:

NOTE: By default, Cisco switches are VTP servers so no configuration is necessary for Server mode on Sw1. This can be verified using the show vtp status command. However, we do need to configure the domain.

Sw1#config t

Enter configuration commands, one per line.  End with CNTL/Z.

Sw1(config)#vtp domain CISCO

Changing VTP domain name from Null to CISCO

Sw1(config)#vtp password CISCO

Setting device VLAN database password to . . .

The content below this message is for members only.

About Us

This is a free bonus site for members of www.howtonetwork.com

Copyright

The content on this copyright Reality Press Ltd.
Copyright Reality Press Ltd.