Lab 5:
Securing VTP Domains
Lab Objective:
The objective of this lab exercise is for you to learn and understand how to secure VTP domains using Cisco Catalyst switches. By default, VTP domains are not password-protected.
Lab Purpose:
Securing the VTP domain is a fundamental skill. When VTP domains are not configured with a password, rogue switches can be added to the network and disrupt service. As a Cisco engineer, as well as in the Cisco CCNA exam, you will be expected to know how to configure VTP passwords.
Certification Level:
This lab is suitable for both CCENT and CCNA certification exam preparation
Lab Difficulty:
This lab has a difficulty rating of 4/10
Readiness Assessment:
When you are ready for your certification exam, you should complete this lab in no more than 5 minutes
Lab Topology:
Please use the following topology to complete this lab exercise:
Task 1:
In preparation for VLAN configuration, configure a hostname on Sw1 and as depicted in the topology.
Task 2:
Configure and verify Sw1 as a VTP Server switch and configure Sw2 as a VTP Client switch. Both switches should be in the VTP domain named CISCO. Secure VTP messages with the VTP password CISCO.
Task 3:
Configure and verify FastEthernet0/1 between Sw1 and Sw2 as an 802.1q trunk.
Task 4:
Configure and verify VLANs 10 and 20 on Sw1 with the names provided above. Validate that these VLANs are still propagated to Sw2 after VTP has been secured.