www.howtonetwork.org

CCNA & CCNP Certifcation Training

  • About
  • Contact
  • FAQ
  • Join
  • Home
  • CCNA
    • ICND1
    • ICND2
    • 101 CCNA LABS
  • CCNP
    • ROUTE
    • SWITCH
    • TSHOOT
    • 101 CCNP LABS
  • CompTIA
    • Security+
    • Network+
  • Design
    • CCDA
    • CCDP
You are here: Home / 101 CCNA LABS / Local Area Networks / Lab 008: Spanning-Tree Protocol Root Bridges using the IOS Macro

Lab 008: Spanning-Tree Protocol Root Bridges using the IOS Macro

Lab 8:

Spanning-Tree Protocol Root Bridges using the IOS Macro

Lab Objective:

The objective of this lab exercise is to use the macro in Cisco IOS to configure a switch to automatically adjust its Spanning Tree priority for a particular VLAN, or group of VLANs, ensuring that it is most likely elected Root Bridge.

Lab Purpose:

VLAN Root Bridge configuration is a fundamental skill. It is always recommended that the Root Bridge be manually configured to ensure that the Layer 2 network is deterministic. However, the macro available in Cisco IOS can also be used. As a Cisco engineer . . .

The content below this message is for members only.

About Us

This is a free bonus site for members of www.howtonetwork.com

Copyright

The content on this copyright Reality Press Ltd.
Copyright Reality Press Ltd.