www.howtonetwork.org

CCNA & CCNP Certifcation Training

  • About
  • Contact
  • FAQ
  • Join
  • Home
  • CCNA
    • ICND1
    • ICND2
    • 101 CCNA LABS
  • CCNP
    • ROUTE
    • SWITCH
    • TSHOOT
    • 101 CCNP LABS
  • CompTIA
    • Security+
    • Network+
  • Design
    • CCDA
    • CCDP
You are here: Home / 101 CCNA LABS / Local Area Networks / Lab 018: Permitting Telnet access to Catalyst Switches

Lab 018: Permitting Telnet access to Catalyst Switches

Lab 18:

Permitting Telnet access to Catalyst IOS switches

Lab Objective:

The objective of this lab exercise is for you to learn and understand how to configure a switch to be access remotely via Telnet. By default, you can Telnet to a switch but cannot log in if no password has been set.

Lab Purpose:

Telnet access configuration is a fundamental skill. More often than not, switches are accessed and configured remotely via Telnet. As a Cisco engineer, as well as in the Cisco CCNA exam, you will be expected to know how to configure a switch to allow an . . .

The content below this message is for members only.

About Us

This is a free bonus site for members of www.howtonetwork.com

Copyright

The content on this copyright Reality Press Ltd.
Copyright Reality Press Ltd.