Task 1:
For reference information on configuring hostnames, please refer to:
Lab 20 Configuration and Verification Task 1
Lab 21 Configuration and Verification Task 1
Task 2:
For reference information on verifying DTE/DCE status, please refer to:
Lab 20 Configuration and Verification Task 2
Lab 21 Configuration and Verification Task 2
R2#conf t
Enter configuration commands, one per line. End with CNTL/Z.
R2(config)#interface serial 0/0
R2(config-if)#clock rate 512000
R2(config-if)#end
R2#
R2#show controllers serial 0/0
Interface Serial0/0
Hardware is PowerQUICC MPC860
DCE V.35, clock rate . . .
The content below this message is for members only.