www.howtonetwork.org

CCNA & CCNP Certifcation Training

  • About
  • Contact
  • FAQ
  • Join
  • Home
  • CCNA
    • ICND1
    • ICND2
    • 101 CCNA LABS
  • CCNP
    • ROUTE
    • SWITCH
    • TSHOOT
    • 101 CCNP LABS
  • CompTIA
    • Security+
    • Network+
  • Design
    • CCDA
    • CCDP
You are here: Home / 101 CCNA LABS / Wide Area Networks Solutions / Lab 28 Solution: Configuring Static Frame Relay Maps

Lab 28 Solution: Configuring Static Frame Relay Maps

Task 1:

For reference information on configuring hostnames, please refer to:

Lab 26 Configuration and Verification Task 1

R1#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

R1(config)#int s1/0

R1(config-if)#ip add 10.254.1.1 255.255.255.128

R1(config-if)#^Z

R2(config)#int s0/0

R2(config-if)#ip address 10.254.1.2 255.255.255.128

R2(config-if)#end

R2#

Task 2:

For reference information on enabling CISCO Frame Relay, please refer to:

Lab 26 Configuration and Verification Task 2

For reference information on . . .

The content below this message is for members only.

About Us

This is a free bonus site for members of www.howtonetwork.com

Copyright

The content on this copyright Reality Press Ltd.
Copyright Reality Press Ltd.