www.howtonetwork.org

CCNA & CCNP Certifcation Training

  • About
  • Contact
  • FAQ
  • Join
  • Home
  • CCNA
    • ICND1
    • ICND2
    • 101 CCNA LABS
  • CCNP
    • ROUTE
    • SWITCH
    • TSHOOT
    • 101 CCNP LABS
  • CompTIA
    • Security+
    • Network+
  • Design
    • CCDA
    • CCDP
You are here: Home / 101 CCNA LABS / Wide Area Networks / Lab 020: Configuring back-to-back Serial connections

Lab 020: Configuring back-to-back Serial connections

Lab 20:

Configuring back-to-back Serial connections

Lab Objective:

The objective of this lab exercise is to configure back-to-back Serial interfaces between two Cisco routers. By default, router Serial interfaces receive their clocking information from an external device such as a CSU/DSU.

Lab Purpose:

Back-to-back Serial interface configuration is a fundamental skill. Because routers typically receive clocking from an external device such as a CSU/DSU, it is imperative to understand how to bring up a back-to-back Serial connection between two routers to set up your home lab, for example. As a . . .

The content below this message is for members only.

About Us

This is a free bonus site for members of www.howtonetwork.com

Copyright

The content on this copyright Reality Press Ltd.
Copyright Reality Press Ltd.