Cable Questions

1. The current standard Ethernet cable still uses eight wires twisted into pairs to prevent _______ _______ and _______.
2. _______ is when a signal from one Ethernet wire spills over into a neighbouring cable.
3. Which command would set the FastEthernet router interface speed to 10Mbps?
4. On a crossover cable, the wire on pin 1 on one end needs to connect to pin _______ on the

other end and pin 2 needs to connect to pin _______.

1. Which cable would you use to connect a router Ethernet interface to a . . .
   

   The content below this message is for members only.

   Username

   Password

   Remember me