- The wire on pin 1 on one end needs to connect to pin 3 on the other end, and pin 2 needs to connect to pin 6 on the other end.
- Cat5.
- duplex full.
- speed 100.
- PC-to-PC, switch-to-switch, and router-to-router.
- False.
- ASIC.
- mac-address-table.
- The interface vlan x and ip address x.x.x.x commands.
- The Switch1(config)#line vty 0 15, Switch1(config-line)#password cisco, and Switch1(config-line)#login . . .
The content below this message is for members only.