www.howtonetwork.org

CCNA & CCNP Certifcation Training

  • About
  • Contact
  • FAQ
  • Join
  • Home
  • CCNA
    • ICND1
    • ICND2
    • 101 CCNA LABS
  • CCNP
    • ROUTE
    • SWITCH
    • TSHOOT
    • 101 CCNP LABS
  • CompTIA
    • Security+
    • Network+
  • Design
    • CCDA
    • CCDP
You are here: Home / ICND1 / Day 19 – Review 4 / Day 19 Lab – DHCP

Day 19 Lab – DHCP

Topology

 Day 19 Lab – DHCP

Instructions

Connect a PC to a router Ethernet interface:

  1. Configure IP address 10.0.0.1/8 onto the router
  2. Create a DHCP pool for the 10.0.0.0/8 network
  3. Add an excluded address of the router interface
  4. Add a default router address of 192.168.1.1
  5. Configure the PC to obtain the IP address via DHCP
  6. Check the IP configuration of the PC for the IP address assignment
  7. Check the router to verify that an IP address is assigned to the PC

 

Solution Hints and Commands

  • Service dhcp command to enable DHCP service
  • Router(config)#ip dhcp pool SUBNET_A command
  • Router(dhcp-config)#network x.x.x.x command
  • Router(dhcp-config)#default-router x.x.x.x command
  • Router(dhcp-config)#dns-server x.x.x.x command
  • Router(dhcp-config)#domain-name xxxx command
  • Router(dhcp-config)#lease x command
  • ip dhcp excluded-address <start_ip> <end_ip> command
  • show ip dhcp binding command

About Us

This is a free bonus site for members of www.howtonetwork.com

Copyright

The content on this copyright Reality Press Ltd.
Copyright Reality Press Ltd.