www.howtonetwork.org

CCNA & CCNP Certifcation Training

  • About
  • Contact
  • FAQ
  • Join
  • Home
  • CCNA
    • ICND1
    • ICND2
    • 101 CCNA LABS
  • CCNP
    • ROUTE
    • SWITCH
    • TSHOOT
    • 101 CCNP LABS
  • CompTIA
    • Security+
    • Network+
  • Design
    • CCDA
    • CCDP
You are here: Home / ICND1 / Day 2 – CSMA/CD, Switching, and VLANs / Day 2 Answers

Day 2 Answers

  1. ASIC.
  2. show mac-address-table.
  3. The interface vlan x command and the ip address x.x.x.x command.
  4. Switch1(config)#line vty 0 15
    Switch1(config-line)#password cisco
    Switch1(config-line)#login
  5. Use the Switch1(config-line)#transport input ssh command.
  6. The authentication method is not defined on another switch.
  7. True.
  8. Trunk, access, or dynamic mode.
  9. Apply the switchport mode <mode> command in Interface Configuration mode.
  10. The duplex and speed commands.
The content below this message is for members only.

About Us

This is a free bonus site for members of www.howtonetwork.com

Copyright

The content on this copyright Reality Press Ltd.
Copyright Reality Press Ltd.