www.howtonetwork.org

CCNA & CCNP Certifcation Training

  • About
  • Contact
  • FAQ
  • Join
  • Home
  • CCNA
    • ICND1
    • ICND2
    • 101 CCNA LABS
  • CCNP
    • ROUTE
    • SWITCH
    • TSHOOT
    • 101 CCNP LABS
  • CompTIA
    • Security+
    • Network+
  • Design
    • CCDA
    • CCDP
You are here: Home / ICND1 / Day 5 – IP Addressing / Day 5 Lab / IP Addressing on Routers Lab

IP Addressing on Routers Lab

Topology
 

Purpose
Learn how to get used to configuring IP addresses on routers and pinging across a Serial interface.

Walkthrough

  1. Start off by establishing your Serial interface numbers, as they may differ from mine in the diagram above. Also, please establish which side has the DCE cable attached because this side will require the clock rate command.

Router>en

Router#sh ip interface brief

Interface       IP-Address  OK? Method Status               Protocol . . .

The content below this message is for members only.

About Us

This is a free bonus site for members of www.howtonetwork.com

Copyright

The content on this copyright Reality Press Ltd.
Copyright Reality Press Ltd.