www.howtonetwork.org

CCNA & CCNP Certifcation Training

  • About
  • Contact
  • FAQ
  • Join
  • Home
  • CCNA
    • ICND1
    • ICND2
    • 101 CCNA LABS
  • CCNP
    • ROUTE
    • SWITCH
    • TSHOOT
    • 101 CCNP LABS
  • CompTIA
    • Security+
    • Network+
  • Design
    • CCDA
    • CCDP
You are here: Home / ICND2 / Day 31 – Spanning Tree Protocol / Day 31 Lab / Spanning Tree Root Selection Lab

Spanning Tree Root Selection Lab

Topology

 

Purpose
Learn how to influence which switch becomes the Spanning Tree Root Bridge.

Walkthrough

  1. Set the hostname of each switch and connect them with a crossover cable. You can then check whether the interface between them is set to “trunk.”

SwitchA#show interface trunk

  1. You may not see the trunk link become active until you set one side as a trunk link.

The content below this message is for members only.

About Us

This is a free bonus site for members of www.howtonetwork.com

Copyright

The content on this copyright Reality Press Ltd.
Copyright Reality Press Ltd.