www.howtonetwork.org

CCNA & CCNP Certifcation Training

  • About
  • Contact
  • FAQ
  • Join
  • Home
  • CCNA
    • ICND1
    • ICND2
    • 101 CCNA LABS
  • CCNP
    • ROUTE
    • SWITCH
    • TSHOOT
    • 101 CCNP LABS
  • CompTIA
    • Security+
    • Network+
  • Design
    • CCDA
    • CCDP
You are here: Home / ICND2 / Day 39 – OSPF / Day 39 Lab / OSPF Lab

OSPF Lab

Topology

  

Purpose
Learn how to configure basic OSPF.

Walkthrough

  1. Configure all IP addresses based on the topology above. Make sure you can ping across the Serial link.
  2. Add OSPF to Router A. Put the network on Loopback0 into Area 1 and the 10 network into Area 0.

RouterA(config)#router ospf 4

RouterA(config-router)#network 172.20.1.0 0.0.0.255 area 1 . . .

The content below this message is for members only.

About Us

This is a free bonus site for members of www.howtonetwork.com

Copyright

The content on this copyright Reality Press Ltd.
Copyright Reality Press Ltd.