www.howtonetwork.org

CCNA & CCNP Certifcation Training

  • About
  • Contact
  • FAQ
  • Join
  • Home
  • CCNA
    • ICND1
    • ICND2
    • 101 CCNA LABS
  • CCNP
    • ROUTE
    • SWITCH
    • TSHOOT
    • 101 CCNP LABS
  • CompTIA
    • Security+
    • Network+
  • Design
    • CCDA
    • CCDP
You are here: Home / ICND2 / Day 41 – Wide Area Networking / Day 41 Lab

Day 41 Lab

PPPoE Lab
Configure PPPoE with CHAP authentication between two routers as per the information presented in this module:

Server configuration:

Router(config)#bba-group pppoe GROUP

Router(config-bba-group)#virtual-template 1

Router(config)#interface virtual-template 1

Router(config-if)#ip address 10.10.10.1 255.255.255.0

Router(config-if)#peer default ip address pool POOL

Router(config)#ip local pool POOL 10.10.10.2 10.10.10.254

Router(config)#interface FastEthernet0/0

Router(config-if)#no ip address

Router(config-if)#pppoe enable group GROUP

Router(config-if)#no shutdown

 

Client . . .

The content below this message is for members only.

About Us

This is a free bonus site for members of www.howtonetwork.com

Copyright

The content on this copyright Reality Press Ltd.
Copyright Reality Press Ltd.