www.howtonetwork.org

CCNA & CCNP Certifcation Training

  • About
  • Contact
  • FAQ
  • Join
  • Home
  • CCNA
    • ICND1
    • ICND2
    • 101 CCNA LABS
  • CCNP
    • ROUTE
    • SWITCH
    • TSHOOT
    • 101 CCNP LABS
  • CompTIA
    • Security+
    • Network+
  • Design
    • CCDA
    • CCDP
You are here: Home / ICND2 / Day 41 – Wide Area Networking / Day 41 Tasks / VSAT

VSAT

Very Small Aperture Terminal (VSAT) technology is a telecommunication system based on wireless satellite technology. A VSAT deployment is made up of a small satellite earth station and a typical antenna, as shown in Figure 41.4 below:

  41.4

Figure 41.4 – Satellite Communication

 

Typical VSAT components include the following:

  • Master earth station
  • Remote earth station
  • Satellite

The master earth station is the network control centre for the entire VSAT network. This is the place where the configuration, management, and monitoring of the entire network is done.

The remote earth station is the hardware installed at the customer premises and includes the following components:

  • ODU (outdoor unit)
  • IDU (indoor unit)
  • IFL (interfacility link)

The VSAT satellite orbits round the globe and receives and transmits signals from and to the earth stations.

VSAT networks can be configured in one of the following topologies:

  • Star topology
  • Mesh topology
  • Star-mesh combination

Using satellite technology to ensure WAN connectivity is generally more expensive than using a traditional terrestrial network connection. The speeds offered by such connections can reach 5Mbps download and 1Mbps upload, which is usually enough for remote sites.

A significant disadvantage of using satellite connectivity is the increased traffic latency, which can reach up to 250 ms one way (antenna to satellite or satellite to antenna) due to the use of radio signals over a very long distance. This should be carefully analysed when planning to install a satellite WAN connection because the increased latency could prevent sensible applications from functioning, while it has no impact on other applications.

Another challenge of using satellite connectivity is that the satellite dish has to have line of sight to the satellite. This means that you have to make use of high frequency ranges (2 GHz), and any type of interference (e.g., natural phenomena like rain or storm clouds) may affect the connection throughput and availability.

Prev

Next

About Us

This is a free bonus site for members of www.howtonetwork.com

Copyright

The content on this copyright Reality Press Ltd.
Copyright Reality Press Ltd.