www.howtonetwork.org

CCNA & CCNP Certifcation Training

  • About
  • Contact
  • FAQ
  • Join
  • Home
  • CCNA
    • ICND1
    • ICND2
    • 101 CCNA LABS
  • CCNP
    • ROUTE
    • SWITCH
    • TSHOOT
    • 101 CCNP LABS
  • CompTIA
    • Security+
    • Network+
  • Design
    • CCDA
    • CCDP
You are here: Home / ICND2 / Day 42 – Frame Relay and PPP / Day 42 Labs / HDLC Lab

HDLC Lab

Topology

 

Purpose
Try your hand at WAN troubleshooting.

Walkthrough
No walkthrough for this lab. Configure the network above. Your WAN will work using HDLC automatically. Ping across the Serial link to ensure that it is working. Then, break the network in the following ways.

  1. Change the encapsulation type on Router B to PPP (thus breaking the link at layer 2). Do this with the following configuration:

RouterB(config)#int Serial0/1/0

RouterB(config-if . . .

The content below this message is for members only.

About Us

This is a free bonus site for members of www.howtonetwork.com

Copyright

The content on this copyright Reality Press Ltd.
Copyright Reality Press Ltd.