www.howtonetwork.org

CCNA & CCNP Certifcation Training

  • About
  • Contact
  • FAQ
  • Join
  • Home
  • CCNA
    • ICND1
    • ICND2
    • 101 CCNA LABS
  • CCNP
    • ROUTE
    • SWITCH
    • TSHOOT
    • 101 CCNP LABS
  • CompTIA
    • Security+
    • Network+
  • Design
    • CCDA
    • CCDP
You are here: Home / ICND2 / Day 42 – Frame Relay and PPP / Day 42 Tasks / Configuring PPP

Configuring PPP

PPP is very easy to configure, as shown in Figure 42.7 and the following output below. You can also add authentication, which will be demonstrated in a moment.

 

Figure 42.7 – A PPP Connection

 

R1#conf t

R1(config)#interface s0

R1(config-if)#ip add 192.168.1.1 255.255.255.0

R1(config-if)#clock rate 64000

R1(config-if)#encapsulation ppp

R1(config-if)#no shut

 

R2#conf . . .

The content below this message is for members only.

About Us

This is a free bonus site for members of www.howtonetwork.com

Copyright

The content on this copyright Reality Press Ltd.
Copyright Reality Press Ltd.