www.howtonetwork.org

CCNA & CCNP Certifcation Training

  • About
  • Contact
  • FAQ
  • Join
  • Home
  • CCNA
    • ICND1
    • ICND2
    • 101 CCNA LABS
  • CCNP
    • ROUTE
    • SWITCH
    • TSHOOT
    • 101 CCNP LABS
  • CompTIA
    • Security+
    • Network+
  • Design
    • CCDA
    • CCDP
You are here: Home / ROUTE / Module 2 / EIGRP – EIGRP Configuration Fundamentals

EIGRP – EIGRP Configuration Fundamentals

EIGRP is enabled in Cisco IOS software using the router eigrp [ASN] global configuration command. The [ASN]designates the EIGRP autonomous system number. This is a 32-bit integer between 1 and 65535. In addition to other factors which will be described later in this chapter, routers running EIGRP must reside within the same autonomous system to successfully form a neighbor relationship. Following the configuration of the router eigrp [ASN] global configuration command, the router transitions to EIGRP router configuration mode wherein you can configure parameters pertaining to EIGRP. The configured autonomous system number . . .

The content below this message is for members only.

About Us

This is a free bonus site for members of www.howtonetwork.com

Copyright

The content on this copyright Reality Press Ltd.
Copyright Reality Press Ltd.