www.howtonetwork.org

CCNA & CCNP Certifcation Training

  • About
  • Contact
  • FAQ
  • Join
  • Home
  • CCNA
    • ICND1
    • ICND2
    • 101 CCNA LABS
  • CCNP
    • ROUTE
    • SWITCH
    • TSHOOT
    • 101 CCNP LABS
  • CompTIA
    • Security+
    • Network+
  • Design
    • CCDA
    • CCDP
You are here: Home / ROUTE / Module 4 / IGP – Configuring and Verifying Route Redistribution (Part 2)

IGP – Configuring and Verifying Route Redistribution (Part 2)

OSPF Redistribution Metrics

Unlike EIGRP, OSPF does not require that a metric be specified when redistribution from any route source into OSPF is performed. OSPF assigns a default route metric based on the route source.  These default assignments are as follows:

  • Redistributed routes from BGP are assigned a metric or cost of 1
  • Redistributed routes from another OSPF process use the source routes cost
  • All other redistributed routes are assigned a default metric of 20

As with EIGRP, there are several ways the OSPF metric can be configured during redistribution . . .

The content below this message is for members only.

About Us

This is a free bonus site for members of www.howtonetwork.com

Copyright

The content on this copyright Reality Press Ltd.
Copyright Reality Press Ltd.