www.howtonetwork.org

CCNA & CCNP Certifcation Training

  • About
  • Contact
  • FAQ
  • Join
  • Home
  • CCNA
    • ICND1
    • ICND2
    • 101 CCNA LABS
  • CCNP
    • ROUTE
    • SWITCH
    • TSHOOT
    • 101 CCNP LABS
  • CompTIA
    • Security+
    • Network+
  • Design
    • CCDA
    • CCDP
You are here: Home / ROUTE / Module 6 / Labs – BGP Path Selection and Manipulation

Labs – BGP Path Selection and Manipulation

Lab Objective:
The objective of this lab exercise is for you to learn and understand how to implement and verify BGP path selection and manipulation solutions in Cisco IOS software.

Lab Topology:

IMPORTANT NOTE

If you are using the www.howtonetwork.org racks, please bring up the LAN interfaces connected to the routers by issuing the no shutdown command on the connected switches. If you are using a home lab with no Switches, you can bring up the LAN interfaces using the following configurations on your routers . . .

The content below this message is for members only.

About Us

This is a free bonus site for members of www.howtonetwork.com

Copyright

The content on this copyright Reality Press Ltd.
Copyright Reality Press Ltd.