www.howtonetwork.org

CCNA & CCNP Certifcation Training

  • About
  • Contact
  • FAQ
  • Join
  • Home
  • CCNA
    • ICND1
    • ICND2
    • 101 CCNA LABS
  • CCNP
    • ROUTE
    • SWITCH
    • TSHOOT
    • 101 CCNP LABS
  • CompTIA
    • Security+
    • Network+
  • Design
    • CCDA
    • CCDP
You are here: Home / ROUTE / Module 8 / IPv6 – Configuring Static IPv6 Routes

IPv6 – Configuring Static IPv6 Routes

The configuration of static IPv6 routes follows similar logic to that of static IPv4 routes. In Cisco IOS software, theipv6 route [ipv6-prefix/prefix-length] [next-hop-address | interface] [distance <1-254> | multicast | tag | unicast]global configuration command is used to configure static IPv6 routes. While the other keywords are familiar, because they are also applicable to IPv4 static routes, theĀ multicastĀ keyword is exclusive to IPv6 and is used to configure an IPv6 static Multicast route. If this keyword is used, the route will not be . . .

The content below this message is for members only.

About Us

This is a free bonus site for members of www.howtonetwork.com

Copyright

The content on this copyright Reality Press Ltd.
Copyright Reality Press Ltd.