Route Chapter Quiz 8 1. IPv6 Link-Local addresses are assigned from the IPv6 Link-Local prefix FEC0::/10 False True Question 1 of 31 2. Click on the Exhibit. Based on the output in the exhibit, we can determine that this is a Type 8 LSA. True False Question 2 of 31 3. Click on the Exhibit. The address format in the exhibit is used for which of the following? Select the BEST answer. An IPv4-mapped IPv6 Address An invalid or illegal IPv6 Address An IPv4-compatible IPv6 Address Complete IPv6 Address Representation Compressed IPv6 Address Representation Question 3 of 31 4. Which of the following statements about IPv6 Unicast Global addresses is TRUE? Select the BEST answer. Aggregate Global Unicast Addresses for IPv6 are assigned by the Internet Assigned Numbers Authority (IANA) and fall within the IPv6 prefix 2000::/10 Aggregate Global Unicast Addresses for IPv6 are assigned by the Internet Assigned Numbers Authority (IANA) and fall within the IPv6 prefix 2000::/48 Aggregate Global Unicast Addresses for IPv6 are assigned by the Internet Assigned Numbers Authority (IANA) and fall within the IPv6 prefix 2000::/12 Aggregate Global Unicast Addresses for IPv6 are assigned by the Internet Assigned Numbers Authority (IANA) and fall within the IPv6 prefix 2000::/16 Aggregate Global Unicast Addresses for IPv6 are assigned by the Internet Assigned Numbers Authority (IANA) and fall within the IPv6 prefix 2000::/3 Question 4 of 31 5. What Transport Layer protocol and port number does RIPng use? Select the BEST answer. User Data Protocol, using port 520 User Data Protocol, using port 120 User Data Protocol, using port 179 RIP next generation runs directly over IP, using protocol number 41 User Data Protocol, using port 521 Question 5 of 31 6. Which of the following statements is TRUE about the IPv6 Global Address Space? Select the BEST answer. The IP version 6 Global Address Space is a 64-bit prefix The IP version 6 Global Address Space is a 32-bit prefix The IP version 6 Global Address Space is a 3-bit prefix The IP version 6 Global Address Space is a 48-bit prefix The IP version 6 Global Address Space is a 16-bit prefix Question 6 of 31 7. What are the default EIGRPv6 K values? Select the BEST answer. K1=1, K2=0, K3=1, K4=1, K5=0 K1=1, K2=0, K3=1, K4=0, K5=0 K1=0, K2=1, K3=1, K4=0, K5=0 K1=1, K2=1, K3=1, K4=0, K5=0 K1=1, K2=1, K3=0, K4=0, K5=0 Question 7 of 31 8. Click on the Exhibit. Given the configurations in the exhibit, which of the following statements are FALSE? Select TWO answers. The MP-BGP4 (IPv6) adjacency between R3 and R4 NOT will be established The MP-BGP4 (IPv6) adjacency between R3 and R4 will be established Both the MP-BGP and BGP4 adjacencies will be established The BGP4 (IPv4) adjacency between R3 and R4 will NOT be established Neither the MP-BGP nor the BGP4 adjacencies will be established The BGP4 (IPv4) adjacency between R3 and R4 will be established Question 8 of 31 9. Which of the following is used in IPv6 to replace Address Resolution Protocol (ARP)? Select the BEST answer. Multicast NDP ICMPv6 Stateless Autoconfiguration DAD Question 9 of 31 10. When implementing route redistribution in IPv6, by default, connected subnets are not included in the redistribution. False True Question 10 of 31 11. You are implementing IPv6 and configure the router as follows: R1(config)#ipv6 unicast-routing R1(config)#interface fa 0/0 R1(config-if)#ipv6 address 3FFF:1234:ABCD:5678::1/64 R1(config-if)#exit Given this configuration, what will the Link-Local address of the FastEthernet0/0 interface be? Select the BEST answer. It is not possible to determine the Link-Local address given the information provided FE80:1234:ABCD:5678::1 FEC0::1234:ABCD:5678:1 FEC0:1234:ABCD:5678::1 FE80::1234:ABCD:5678:1 Question 11 of 31 12. What BGP attributes have been updated to include support for IPv6 addressing? Select TWO answers. MED ORIGINATOR_ID NEXT_HOP NLRI AGGREGATE_ADDRESS LOCAL_PREF Question 12 of 31 13. When implementing EIGRPv6, global IPv6 Unicast subnets do not need to be the same for a neighbor relationship to be established between two routers that reside within the same autonomous system and are on a common network segment. True False Question 13 of 31 14. Consider the following IP version 6 address which has been assigned to a router interface: 3FFF:1A2B:3C4D:5E6F:213:19FF:FE86:A20 Looking at this address, we can determine that this address includes a globally assigned MAC False True Question 14 of 31 15. Which of the following are NOT valid IPv6 addresses? Select TWO answers. ::172.16.255.1 :: 3FFF:1234:ABCD:5678:020C:CEFF:FEA7:F3A0 fec0:2004:ab10:00cd:1234: 0000:0000:6789 ::FFFF: 172.16.255.1 EFFF:0000:0000:1010:1A2B:5000:0B00:DE0F 7::1 Question 15 of 31 16. Click on the Exhibit. Given the configuration in the exhibit, which of the following statements is TRUE in regards to the output of the show bgp ipv6 unicast command on routers R1 and R3? Select the BEST answer. The NEXT_HOP for all UPDATES exchanged between R1 and R3 will include only IPv4-Mapped IPv6 Address There will be no NEXT_HOP for any prefixes as the BGP configuration is incomplete and there is no adjacency The NEXT_HOP for all UPDATES exchanged between R1 and R3 will include only IPv4-Compatible IPv6 Address The NEXT_HOP for all UPDATES exchanged between R1 and R3 will include only the Link-Local IPv6 address The NEXT_HOP for all UPDATES exchanged between R1 and R3 will include the Link-Local and Global IPv6 addresses The NEXT_HOP for all UPDATES exchanged between R1 and R3 will include only the Global IPv6 address Question 16 of 31 17. Click on the Exhibit. Given the output above, we can determine that this is an external EIGRPv6 route. True False Question 17 of 31 18. Click on the Exhibit. Based on the output in the exhibit, we can determine that this is a Type 8 LSA. False True Question 18 of 31 19. Click on the Exhibit. Given the configuration in the exhibit, what additional MP-BGP configuration command is required to bring the specified neighbor up? Select the BEST answer. R1(config-router-nei)#neighbor 3FFF:1234:ABCD:1::3 activate R1(config-router-ipv6)#neighbor 3FFF:1234:ABCD:1::3 activate R1(config-router-bgp-af)#neighbor 3FFF:1234:ABCD:1::3 activate R1(config-router-af)#neighbor 3FFF:1234:ABCD:1::3 activate R1(config-router-ipv6-af)#neighbor 3FFF:1234:ABCD:1::3 activate Question 19 of 31 20. Click on the Exhibit. Given the output in the exhibit,what additional configuration is required to implement RIPng? Select the BEST answer. R1(config)#interface serial 0/1 R1(config-if)#ipv6 rip R1-RIP-NG enable R1(config)#interface serial 0/1 R1(config-if)#ipv6 enable rip R1-RIP-NG R1(config)#interface serial 0/1 R1(config-if)#ipv6 enable R1-RIP-NG rip R1(config)#interface serial 0/1 R1(config-if)#ipv6 rip router R1-RIP-NG enable R1(config)#interface serial 0/1 R1(config-if)#ipv6 router rip R1-RIP-NG enable Question 20 of 31 21. Which of the following is NOT a reason for migrating from IPv4 to IPv6? Select the BEST answer. Integrated Mobility The Simplified IPv6 Packet Header Larger Address Space Integrated Enhanced Security IPv6 Extendibility Stateful Autoconfiguration IPv6 Addressing Hierarchy IPv6 Broadcast Elimination Question 21 of 31 22. Click on the Exhibit. Assuming that neighbor FE80::205:5EFF:FE6E:5C80 resides on stub area 5 and is the ABR, what additional configuration is required on R1 to ensure that the OSPF adjacency is established? Select TWO answers. R1(config-if)#ipv6 ospf 1 area 5 stub R1(config-rtr)#ipv6 ospf 1 area 5 stub R1(config-if)#ipv6 ospf 1 area 5 R1(config-rtr)#area 5 stub no-summary R1(config-rtr)#ipv6 ospf 1 area 5 serial 0/0 R1(config-rtr)#area 5 stub Question 22 of 31 23. Which of the following statements is TRUE in regards to IPv6 Solicited-Node Multicast addresses? Select the BEST answer. Solicited-Node Multicast Addresses are defined by the IPv6 prefix FF00::1:FF00:0000/104 Solicited-Node Multicast Addresses are defined by the IPv6 prefix FF01::1:FF00:0000/104 Solicited-Node Multicast Addresses are defined by the IPv6 prefix FF01::2:FF00:0000/104 Solicited-Node Multicast Addresses are defined by the IPv6 prefix FF02::1:FF00:0000/104 Solicited-Node Multicast Addresses are defined by the IPv6 prefix FF00::2:FF00:0000/104 Question 23 of 31 24. What two additional LSAs are used when OSPFv3 is implemented? Select TWO answers. Type 10 Type 7 Type 8 Type 6 Type 9 Question 24 of 31 25. Click on the Exhibit. Given the configurations in the exhibit, the neighbor relationship between R1 and R3 will be established. True False Question 25 of 31 26. Click on the Exhibit. Given the output in the exhibit, which of the following statements is TRUE? Select the best answer. Neighbor relationships will only be established with neighbors that reside on the 3FFF:1234:ABCD:1::/64 subnet The no auto-summary EIGRPv6 router configuration command should be enabled The EIGRPv6 process will begin sending out Hello packets on interface GigabitEthernet0/0 to discover neighbors An IPv6 router ID must be configured for the EIGRPv6 process The EIGRPv6 process will not send out Hello packets on interface GigabitEthernet0/0 to discover neighbors The ipv6 router eigrp 1 enable command must be issued on the interface instead Question 26 of 31 27. Which of the following types of traffic is NOT supported or included in the IPv6 standard? Select the BEST answer. Multicast Unicast Anycast Broadcast Question 27 of 31 28. Which of the following statements about the IPv6 packet header is TRUE? Select the BEST answer. Each IPv6 packet contains a standard 60-byte header Each IPv6 packet contains a standard 40-bit header Each IPv6 packet contains a standard 20-byte header Each IPv6 packet contains a standard 40-byte header Each IPv6 packet contains a standard 40-byte header Each IPv6 packet contains a standard 20-bit header Each IPv6 packet contains a standard 60-byte header Question 28 of 31 29. Which of the following IPv6 components provides a similar function to Gratuitous ARP used in IPv4? Select the BEST answer. ICMPv6 DAD Stateful Autoconfiguration NDP Stateless Autoconfiguration Question 29 of 31 30. Click on the Exhibit. In addition to the information in the exhibit, the router that is sending the RIPng updates is configured as follows: ipv6 unicast-routing ipv6 router rip ROUTE ! interface serial0/1 description ‘p2p link to R1’ ipv6 address 3ffe:1234:abcd:5678::2/64 ipv6 enable ipv6 rip ROUTE enable ! interface fastethernet 0/0 ipv6 address 3fff:1234:abcd:2::3/64 ipv6 address 3fff:1234:abcd:3::3/64 ipv6 enable ipv6 rip ROUTE enable Given these two outputs, what is the next hop IPv6 address of the prefixes in the exhibit? ff02:1234:abcd:5678::2 3ffe:1234:abcd:5678::2 It is not possible to determine this with the information provided fe80:1234:abcd:5678::2 fec0:1234:abcd:5678::2 Question 30 of 31 31. A router interface has the following MAC address assigned to it: 0013.1986.0a20 Given this, which of the following would be a valid EUI-64 address? Select the BEST answer. FEC0::213:19FF:FE86:A20 FE80:1A2B:3C4D:5E6F:1213:19FF:FE86:A20 FE80::213:19FF:FE86:A20 3FFF:1A2B:3C4D:5E6F:213:19FE:FE86:A20 3FFF:1A2B:3C4D:5E6F:213:19:FE86:A20 Question 31 of 31 Loading…