- 1 – Campus LANs
- Lessons
- Exams
- 2 – VLANs and VTP
- Lessons
- Labs
- Exams
- 3 – IEEE 802.1D Spanning Tree Protocol
- Lessons
1 – IEEE 802.1D Spanning Tree Protocol
2 – An Introduction to the Spanning Tree Protocol
3 – Spanning Tree Bridge Protocol Data Units
4 – Spanning Tree Port States
5 – Understanding the Spanning Tree Bridge ID
6 – IEEE 802.1t and the Extended System ID
7 – Spanning Tree Root Bridge Election
8 – Understanding Spanning Tree Cost and Priority
9 – Spanning Tree Root and Designated Ports
10 – Spanning Tree Timers
11 – Understanding the Spanning Tree Diameter
12 – Cisco Spanning Tree Enhancements
13 – Unidirectional Link Detection
14 – Configuring Spanning Tree Protocol
15 – Troubleshooting Spanning Tree Networks
16 – 802.1D Summary
- Labs
- Exams
- Lessons
- 4 – Advanced Spanning Tree Protocol
- Lessons
1 – Advanced STP Lesson Plan
2 – Rapid Spanning Tree Protocol Overview
3 – The Modified RSTP BPDU
4 – RSTP BPDU Handling
5 – RSTP Port States
6 – RSTP Port Roles
7 – RSTP Rapid Transition
8 – RSTP Synchronization
9 – RSTP Integrated Enhancements
10 – RSTP Topology Changes
11 – 802.1D and 802.1w Interoperability
12 – RSTP with PVST+
13 – Configuring Rapid Spanning Tree Protocol
14 – Understanding Multiple Spanning Tree Protocol
15 – MST BPDU Format
16 – MST Region Functionality
17 – MST Spanning Tree Instances
18 – Implementing and Verifying MST
19 – Advanced STP Summary
- Labs
- Exams
- Lessons
- 5 – Etherchannels and Link Aggregation Protocol
- Lessons
1 – Lesson Plan
2 – Understanding EtherChannels
3 – Port Aggregation Protocol
4 – PAgP Port Modes
5 – PAgP Learn Method
6 – PAgP EtherChannel Protocol Packet Forwarding
7 – Link Aggregation Control Protocol
8 – LACP Port Modes
9 – LACP Parameters
10 – LACP Redundancy
11 – EtherChannel Load-Distribution Methods
12 – EtherChannel Configuration Guidelines
13 – Configuring and Verifying Layer 2 EtherChannels
14 – Protecting STP When Using EtherChannels
15 – Etherchannel Summary
- Labs
- Exams
- Lessons
- 6 – Understanding and Configuring LAN Security
- Lessons
- Labs
- Exams
- 7 – Cisco Catalyst Multilayer Switching
- Lessons
- Labs
- Exams
- 8 – High Availablity and LAN Redundancy
- Lessons
1 – High Availability Lesson Plan
2 – Understanding High Availability
3 – Understanding Reliability
4 – Understanding Serviceability
5 – The Different Types of High Availability
6 – Hot Standby Router Protocol – Part 1
7 – Hot Standby Router Protocol – Part 2
8 – Hot Standby Router Protocol – Part 3
9 – Virtual Router Redundancy Protocol – Part 1
10 – Virtual Router Redundancy Protocol – Part 2
11 – Gateway Load Balancing Protocol
12 – The ICMP Router Discovery Protocol
13 – Supervisor Engine Redundancy
14 – StackWise Technology
15 – Catalyst Switch Power Redundancy
16 – Non-Stop Forwarding
- Labs
- Exams
- Lessons
- 9 – Extending the LAN with Wireless Solutions
- Lessons
1 – Wireless Lesson Plan
2 – Wireless Local Area Network Overview
3 – IEEE 802.11 Components
4 – IEEE 802.11 and the OSI Reference Model
5 – Collision Avoidance: CSMA/CA
6 – MAC Sublayer Coordination Functions
7 – The Wireless Network Hidden Node Problem
8 – IEEE 802.11 Frame Types
9 – Wireless LAN Standards
10 – The Cisco Unified Wireless Network
11 – The Cisco Wireless LAN Solution
12 – Configuring Switches for WLAN Solutions
13 – Wireless Summary
- Labs
- Exams
- Lessons
- 10 – QoS and Advanced Catalyst Services
- Lessons
1 – QoS Lesson Plan
2 – Integrating Voice, Video, and Data Traffic
3 – Configuring Switches to Support Cisco IP Phones
4 – Three QoS Models
5 – Quality of Service Overview
6 – Understanding LAN QoS
7 – Catalyst QoS Basics
8 – Catalyst Ingress QoS Mechanisms
9 – Catalyst Egress QoS Mechanisms
10 – Power over Ethernet
11 – QoS Summary
- Exams
- Lessons