www.howtonetwork.org

CCNA & CCNP Certifcation Training

  • About
  • Contact
  • FAQ
  • Join
  • Home
  • CCNA
    • ICND1
    • ICND2
    • 101 CCNA LABS
  • CCNP
    • ROUTE
    • SWITCH
    • TSHOOT
    • 101 CCNP LABS
  • CompTIA
    • Security+
    • Network+
  • Design
    • CCDA
    • CCDP
You are here: Home / SWITCH / Module 2 / VLANs and VTP – Chapter Summary

VLANs and VTP – Chapter Summary

The following section is a summary of the major points you should be aware of in this chapter.
Understanding Virtual LANs (VLANs)

  • There are two primary types of switch VLAN port types:
    1. Access Ports
    2. Trunk Ports
  • Access ports are switch ports that are assigned to a single VLAN
  • Access ports can only belong to a single VLAN
  • The two methods that can be used to assign access port to VLANs are:
    1. Static VLAN Assignment
    2. Dynamic VLAN Assignment
  • The content below this message is for members only.

About Us

This is a free bonus site for members of www.howtonetwork.com

Copyright

The content on this copyright Reality Press Ltd.
Copyright Reality Press Ltd.