www.howtonetwork.org

CCNA & CCNP Certifcation Training

  • About
  • Contact
  • FAQ
  • Join
  • Home
  • CCNA
    • ICND1
    • ICND2
    • 101 CCNA LABS
  • CCNP
    • ROUTE
    • SWITCH
    • TSHOOT
    • 101 CCNP LABS
  • CompTIA
    • Security+
    • Network+
  • Design
    • CCDA
    • CCDP
You are here: Home / SWITCH / Module 2 / VLANs and VTP – Configuring and Verifying VLANs

VLANs and VTP – Configuring and Verifying VLANs

In this section, we are going to be learning about the configuration of VLANs and some of their characteristics in Cisco IOS Catalyst switches. When configuring Ethernet VLANs, keep in mind that Ethernet VLAN 1 uses only default values. This means that you cannot change the default values assigned to VLAN 1 as illustrated in the output below:

VTP-Switch-1(config)#vlan 1
VTP-Switch-1(config-vlan)#mtu 1518
Default VLAN 1 may not have its MTU changed.
VTP-Switch-1(config-vlan)#name TEST
Default VLAN 1 may not have its . . .

The content below this message is for members only.

About Us

This is a free bonus site for members of www.howtonetwork.com

Copyright

The content on this copyright Reality Press Ltd.
Copyright Reality Press Ltd.