www.howtonetwork.org

CCNA & CCNP Certifcation Training

  • About
  • Contact
  • FAQ
  • Join
  • Home
  • CCNA
    • ICND1
    • ICND2
    • 101 CCNA LABS
  • CCNP
    • ROUTE
    • SWITCH
    • TSHOOT
    • 101 CCNP LABS
  • CompTIA
    • Security+
    • Network+
  • Design
    • CCDA
    • CCDP
You are here: Home / SWITCH / Module 2 / VLANs and VTP – Configuring and Verifying VTP Operation

VLANs and VTP – Configuring and Verifying VTP Operation

VTP configuration is very straightforward and is performed by issuing the vtp [keyword] global configuration command. The keywords available with this command are illustrated in the following switch output:

VTP-Server(config)#vtp ?
domain     Set the name of the VTP administrative domain.
file       Configure IFS filesystem file where VTP configuration is stored.
interface  Configure interface as the preferred source for the VTP IP
updater address.
mode       Configure VTP device mode
password   Set the password for the VTP administrative domain
pruning    Set the administrative domain to permit pruning
version    Set the administrative domain to VTP version

The . . .

The content below this message is for members only.

About Us

This is a free bonus site for members of www.howtonetwork.com

Copyright

The content on this copyright Reality Press Ltd.
Copyright Reality Press Ltd.