www.howtonetwork.org

CCNA & CCNP Certifcation Training

  • About
  • Contact
  • FAQ
  • Join
  • Home
  • CCNA
    • ICND1
    • ICND2
    • 101 CCNA LABS
  • CCNP
    • ROUTE
    • SWITCH
    • TSHOOT
    • 101 CCNP LABS
  • CompTIA
    • Security+
    • Network+
  • Design
    • CCDA
    • CCDP
You are here: Home / SWITCH / Module 2 / VLANs and VTP – Troubleshooting and Debugging VTP

VLANs and VTP – Troubleshooting and Debugging VTP

The show vtp status command provides information on VTP defaults and configuration. This information includes the VTP version enabled on the switch, the VTP domain name (if one is configured), the IP address of the updater, the configuration revision number, the number of VLANs, and the VTP operating mode of the switch. The information printed by this command is illustrated in the following output:

Catalyst2950-VTP-Server#show vtp status
VTP Version                     : 2
Configuration Revision          : 23
Maximum VLANs supported locally : 250
Number of existing VLANs        : 15
VTP Operating Mode              : Server
VTP Domain Name                 : howtonetwork.net
VTP . . .

The content below this message is for members only.

About Us

This is a free bonus site for members of www.howtonetwork.com

Copyright

The content on this copyright Reality Press Ltd.
Copyright Reality Press Ltd.