www.howtonetwork.org

CCNA & CCNP Certifcation Training

  • About
  • Contact
  • FAQ
  • Join
  • Home
  • CCNA
    • ICND1
    • ICND2
    • 101 CCNA LABS
  • CCNP
    • ROUTE
    • SWITCH
    • TSHOOT
    • 101 CCNP LABS
  • CompTIA
    • Security+
    • Network+
  • Design
    • CCDA
    • CCDP
You are here: Home / SWITCH / Module 3 / 802.1D Spanning Tree Protocol – Troubleshooting Spanning Tree Networks

802.1D Spanning Tree Protocol – Troubleshooting Spanning Tree Networks

While we will not be going into detail on Spanning Tree troubleshooting in this guide, because that has been moved to the new TSHOOT certification exam, there are some commands with which you should be familiar in order to support and troubleshoot the STP network. These commands will be described and illustrated in this section. The following output shows the different options available with the show spanning-tree command:

VTP-Switch-1#show spanning-tree ?
active             Report on active interfaces only
backbonefast       Show spanning tree backbonefast status
blockedports       Show blocked ports
bridge             Status and configuration of . . .

The content below this message is for members only.

About Us

This is a free bonus site for members of www.howtonetwork.com

Copyright

The content on this copyright Reality Press Ltd.
Copyright Reality Press Ltd.