Switch Bonus Quiz 4 1. Which of the following statements about MLS are TRUE? Select THREE answers. In demand-based switching, the FIB maintains flow information for all active flows A flow is a bidirectional sequence of packets between a particular source and destination Demand based switching is also referred to as CEF based switching Demand based switching is also referred to as flow based switching A flow is a unidirectional sequence of packets between a particular source and destination In demand-based switching, the MLS cache maintains flow information for all active flows Question 1 of 22 2. Which of the following statements is TRUE in regards to CEF implementation on CEF-based Cisco Catalyst switches? By default, all CEF-based Cisco Catalyst switches use a cached Layer 3 switching engine By default, all CEF-based Cisco Catalyst switches use a distributed Layer 3 switching engine By default, all CEF-based Cisco Catalyst switches use a central Layer 3 switching engine By default, all CEF-based Cisco Catalyst switches use a default Layer 3 switching engine By default, all CEF-based Cisco Catalyst switches use a accelerated Layer 3 switching engine Question 2 of 22 3. When using plain-text or MD5 authentication, the gateway will reject HSRP packets if any which of the following is true? Select THREE answers. If the authentication schemes differ on the router and in the outgoing packets If the MD5 digests differ on the router and in the incoming packet If the text authentication strings differ on the router and in the incoming packet If the HMAC digests differ on the router and in the outgoing packet If the text authentication strings differ on the router and in the outgoing packet If the HMAC digests differ on the router and in the incoming packet If the MD5 digests differ on the router and in the outgoing packet If the authentication schemes differ on the router and in the incoming packets Question 3 of 22 4. Click on the Exhibit. The Exhibit illustrates traditional (flow-based) MLS. What are the packets labeled 1 and 2? Select TWO answers. The packet labeled 1 is the candidate packet The packet labeled 2 is the enabler packet The packet labeled 1 is the enabler packet The packet labeled 2 is the cache packet The packet labeled 1 is the cache packet The packet labeled 2 is the candidate packet Question 4 of 22 5. In regards to LACP, what binds multiple physical ports and presents them to upper Layers of the stack as a single logical port? Select the BEST answer. The Collector The Marker and Marker Response The Link Aggregation Sub-Layer The Distributor The MAC Sub-Layer Question 5 of 22 6. Which of the following statements about the 802.11 Inter Frame Spaces are TRUE? Select TWO answers. DIFS is used to separate transmissions belonging to a single dialog SIFS is used by a station that is ready to start a new transmission PIFS is used to separate transmissions belonging to a single dialog PIFS is used by a station that is ready to start a new transmission DIFS is used by a station that is ready to start a new transmission SIFS is used to separate transmissions belonging to a single dialog Question 6 of 22 7. What CEF component maintains next-hop address information based on the information in the RIB? Cache PFC Adjaceny Table Flow FIB MSFC Question 7 of 22 8. By default, VRRP messages are sent with the plain-text key string ‘cisco’, as a simple method to authenticate VRRP peers False True Question 8 of 22 9. What is the default maximum number of secure addresses that will be learned by the switch when port security is enabled? There is no limit to the number of addresses that can be learned It depends on the CAM table space; each port is allocated a limit based on this The switch port will learn up to 2 different addresses The switch port will learn no more than 1024 address The switch port will only learn 1 address Question 9 of 22 10. By default, when configuring HSRP, if the standby gateway does not receive Hellos within ______ seconds, it assumes that the active gateway is down and assumes this role itself. 5 10 15 3 30 Question 10 of 22 11. What configuration commands can be used to ensure that HSRP group 5 uses a MAC address other than the default HSRP MAC address? Select TWO answers. Switch(config)#standby use-bia Switch(config-if)#standby 1 use-bia Switch(config-if )#standby 1 mac-address aaaa.bbbb.cccc Switch(config)#standby mac-address aaaa.bbbb.cccc Switch(config)#standby 1 use bia Switch(config-if)#standby use-bia Switch(config)#standby 1 mac-address aaaa.bbbb.cccc Switch(config-if)#standby mac-address aaaa.bbbb.cccc Question 11 of 22 12. Which of the following statements about Cisco Express Forwarding (CEF) are TRUE? Select TWO answers. CEF operates at the control plane and is a demand-driven proprietary switching mechanism CEF uses a RIB to make IP destination prefix-based switching decisions CEF uses two data structures, which are the FIB and the Adjacency Table CEF uses two data structures, which are the RIB and the FIB CEF operates at the control plane and is a topology-driven proprietary switching mechanism CEF operates at the data plane and is a demand-driven proprietary switching mechanism CEF uses a PFC to make IP destination prefix-based switching decisions CEF operates at the data plane and is a topology-driven proprietary switching mechanism Question 12 of 22 13. Which of the following statements about LACP is TRUE? LACP frames are encoded with the EtherType value 0x8808 LACP frames are encoded with the EtherType value 0x8805 LACP frames are encoded with the EtherType value 0x8803 LACP frames are encoded with the EtherType value 0x8801 LACP frames are encoded with the EtherType value 0x8809 Question 13 of 22 14. Which of the following would NOT be contained in HSRP Hello messages? HSRP Timer Values The Group ID HSRP Multicast Address HSRP Authentication Information HSRP Version Question 14 of 22 15. The DCF is used in IEEE 802.11 networks to manage access to the RF medium. The DCF is composed of the following two main components. What are these two components? Select the two BEST answers. CSMA/CA Random Backoff VCS IFS NAV Question 15 of 22 16. Which of the following are valid HSRP message types? Select THREE answers. Hello Standby Active Speak Resign Coup Question 16 of 22 17. Which of the following statements about LACP is TRUE? Architecturally, the LACP application is a client to the Data Link Layer LACP packets are sent to the IEEE 802.3 Slow Protocols Multicast group address 01-80-C2-00-00-00 The LACP defines frame collection and distribution along with an LACP agent By default, all outbound packets on one link in a port channel are blocked from returning on any other link of the port channel The MAC Sub-Layer binds multiple physical ports and presents them to upper Layers of the stack as a single logical port Question 17 of 22 18. The MSFC performs control plane functions, such as learning about the networks and builds routing tables. It then builds a RIB and pushes this to the PFC. The PFC forwards packets to their respective destinations based on the next-hop entries that are located in the RIB. False True Question 18 of 22 19. Which of the following mechanisms is used by the IEEE 802.11 standard? CMSA/CA CSMA/CA CSMA/CD CMSA/CD Question 19 of 22 20. What EtherChannel modes are supported by LACP? Select TWO answers. Silent Auto Desirable Non-Silent Active Passive Question 20 of 22 21. Which of the following statements about port security aging are FALSE? Select THREE answers. By default, if a host with a secured MAC address is removed from the port, the entry will be removed from the CAM By default, if a host with a secured MAC address is removed from the port, the entry will be retained in the CAM By default, the aging time is set to an absolute value of 0 By default, the aging time is set to an inactivity value of 0 The valid aging time range is 0 to 1440 minutes The valid aging time range is 1 to 1440 minutes Question 21 of 22 22. Which of the following is not a responsibility of the Policy Feature Card (PFC)? Quality of Service (QoS) IP Multicast packet replication Building the Forwarding Information Base (FIB) To processes security policies such as Access Control Lists (ACLs) Supporting routing and bridging Question 22 of 22 Loading…
