www.howtonetwork.org

CCNA & CCNP Certifcation Training

  • About
  • Contact
  • FAQ
  • Join
  • Home
  • CCNA
    • ICND1
    • ICND2
    • 101 CCNA LABS
  • CCNP
    • ROUTE
    • SWITCH
    • TSHOOT
    • 101 CCNP LABS
  • CompTIA
    • Security+
    • Network+
  • Design
    • CCDA
    • CCDP
You are here: Home / SWITCH / Module 7 / Cisco Catalyst Multilayer Switching – Verifying MLS Operation

Cisco Catalyst Multilayer Switching – Verifying MLS Operation

MLS verification primarily entails verifying and validating correct CEF operation. This section guides you through the configuration commands required to verify MLS.
Verifying the Control Plane
The show ip route and show arp commands are used to verify that the correct information is present at the control plane. Additionally, an ICMP PING can also be used to verify connectivity with the IP address. The following output shows the show ip route command for the specified prefix:

VTP-Server-1#show ip route 150.254.1.2
Routing entry for 150.254.1 . . .

The content below this message is for members only.

About Us

This is a free bonus site for members of www.howtonetwork.com

Copyright

The content on this copyright Reality Press Ltd.
Copyright Reality Press Ltd.