Switch Bonus Quiz 9 1. Which of the following statements about LWAPP Layer 2 and Layer 3 discovery are TRUE? Select THREE answers. The LAPs issue a DHCPREQUEST to get an IP address The LAPs issue a DHCPDISCOVER to get an IP address The LAPs use the Layer 3 discovery algorithm only if the Layer 2 discovery method is not supported The LAPs use the Layer 2 discovery algorithm only if the Layer 3 discovery method is not supported The LWAPP Layer 2 WLC discovery algorithm repeats until at least one WLC is found and joined The LWAPP Layer 3 WLC discovery algorithm repeats until at least one WLC is found and joined Question 1 of 22 2. What DHCP option should be used when configuring Cisco IOS DHCP server to support LAPs? DHCP option 43 DHCP option 34 DHCP option 143 DHCP option 150 DHCP option 431 Question 2 of 22 3. Which of the following statements about Service-Oriented Network Architecture (SONA) are TRUE? Select TWO answers. SONA is an open framework for network-based services used by enterprise applications to drive business results The SONA framework includes the Software-as-a-Service, core common services, and physical infrastructure layers SONA is an proprietary framework for network-based services used by enterprise applications to drive business results The SONA framework includes the applications, core common services, and physical infrastructure layers Question 3 of 22 4. Which of the following statements about Catalyst QoS is TRUE? In Catalyst switches, the default CoS value assigned to an untrusted interface is 2 In Catalyst switches, the default CoS value assigned to an untrusted interface is 6 In Catalyst switches, the default CoS value assigned to an untrusted interface is 7 In Catalyst switches, the default CoS value assigned to an untrusted interface is 0 In Catalyst switches, the default CoS value assigned to an untrusted interface is 1 Question 4 of 22 5. Which IEEE 802.1Q field contains a 3-bit User Priority field, referred to as the 802.1p priority field? Tag CFI CoS VID TCI TPID Question 5 of 22 6. What happens if the revision versions on the WLC and the LAP do not match? The LAP defaults to CAPWAP instead of LWAPP The LAP and WLC will operate using the two different revisions The LAP is unable to join the controller The LAP downloads the controller software The LAP uses Layer 3 Discovery instead Question 6 of 22 7. Which of the following accurately describes Software as a Service (SaaS) Internally hosted software that is provided as a service to employees Commercial, composite and internally developed applications Systems that are deployed throughout the enterprise Functionality that creates a common quality, ability or feature that can be used by higher level applications Externally hosted software that is provided as a licensed service to customers Question 7 of 22 8. Click on the Exhibit. The Exhibit illustrates inter-subnet roaming. What are the devices named X and Y? X = Local and Y = Foreign X = Root and Y = Backup X = Local and Y = Remote X = Anchor and Y = Foreign X = Foreign and Y = Anchor Question 8 of 22 9. When an AVF assumes the roles of AVG, how does GLBP ensure that the old forwarder MAC address ceases being used and hosts are migrated away from this address? Select TWO answers. Through the use of the TC While Timer Through the use of the Timeout Timer Through the use of the Convergence Timer Through the use of the Holddown Timer Through the use of the Redirect Timer Question 9 of 22 10. __________________________ is used to differentiate one stream of traffic from another so that different service levels can be applied to different streams of traffic Congestion Management Marking Classification Congestion Avoidance Policing Question 10 of 22 11. LAN Quality of Service is primarily used for bandwidth management. True False Question 11 of 22 12. Which of the following is a Wireless LAN Controller that can be used with Cisco Catalyst 6500 switches? WLA WiSM WCS WLCM CUWN Question 12 of 22 13. What is the default Class of Service (CoS) value assigned to voice packets? 3 5 7 4 6 Question 13 of 22 14. It is important to always use the spanning-tree portfast trunk command on the switch port configured as a trunk link when connected to an autonomous Access Point False True Question 14 of 22 15. What protocols do WLCs use to communicate with LAPs? Select TWO answers. LWAP LWAPP CAPWAP CAPWAPP Question 15 of 22 16. In regards to WLAN protocols, which of the following statements is TRUE? Layer 2 deployments are not supported by LWAPP Layer 3 deployments are not supported by LWAPP Layer 2 deployments are not supported by CAPWAP Neither LWAPP nor CAPWAPP support Layer 2 deployments Layer 3 deployments are not supported by CAPWAP Neither LWAPP nor CAPWAPP support Layer 3 deployments Question 16 of 22 17. Wireless LAN Controllers are responsible for system wide wireless LAN functions. Which is NOT a WLC function? Quality of Service (QoS) Mobility Wireless LAN Security Management Dynamic Client Load Balancing across LAP Intrusion prevention Wireless LAN Redundancy Zero-Touch Deployment of Users Question 17 of 22 18. Which of the following WLAN roaming types will result in asynchronous routing? Intra-Controller Roaming Local Roaming Inter-Subnet Roaming Intermediate Roaming Inter-Controller Roaming Remote Roaming Question 18 of 22 19. Which of the following statements about GLBP are FALSE? Select FOUR answers. By default, GLBP preemption is enabled A backup virtual forwarder can become the AVF if the current AVF weighting falls below the low weighting threshold for 30 seconds By default, the GLBP virtual forwarder preemptive scheme is enabled with a delay of 15 seconds By default, each gateway is assigned a weight of 100 By default, the GLBP virtual forwarder preemptive scheme is enabled with a delay of 30 seconds By default, each gateway is assigned a weight of 110 By default, GLBP preemption is disabled A backup virtual forwarder can become the AVF if the current AVF weighting falls below the low weighting threshold for 15 seconds Question 19 of 22 20. Which of the following statements accurately describes buffer overflows? Buffer overflows occur when multiple egress ports are contending for the same egress port Buffer overflows occur when multiple ingress ports are contending for the same ingress port Buffer overflows occur when multiple ingress ports are contending for the same egress port Buffer overflows occur when multiple egress ports are contending for the same egress port Question 20 of 22 21. GLBP supports three different load sharing methods. What are these three different methods? Distributed Least Used Random Host-dependent Weighted Round Robin Most Used Question 21 of 22 22. The Cisco SONA is a software supplicant that helps you deploy a single authentication framework to access both wired and wireless networks. It provides 802.1x user and device authentication and manages user and device identity and the network-access protocols required for secure access. False True Question 22 of 22 Loading…
