www.howtonetwork.org

CCNA & CCNP Certifcation Training

  • About
  • Contact
  • FAQ
  • Join
  • Home
  • CCNA
    • ICND1
    • ICND2
    • 101 CCNA LABS
  • CCNP
    • ROUTE
    • SWITCH
    • TSHOOT
    • 101 CCNP LABS
  • CompTIA
    • Security+
    • Network+
  • Design
    • CCDA
    • CCDP
You are here: Home / TSHOOT / Module 6 / Troubleshooting Route Advertisement

Troubleshooting Route Advertisement

As is the case with EIGRP, there may be times when notice that OSPF is not advertising certain routes. For the most part, this is typically due to some misconfigurations versus a protocol failure. Some common reasons include the following:

  1. OSPF Is Not Enabled on the Interface(s)
  2. The Interface(s) is/are down
  3. Interface Addresses in a Different Area
  4. OSPF Misconfigurations

A common reason why OSPF does not advertise routes is that the network is not advertised via OSPF. In current Cisco IOS versions, networks can be advertised using . . .

The content below this message is for members only.

About Us

This is a free bonus site for members of www.howtonetwork.com

Copyright

The content on this copyright Reality Press Ltd.
Copyright Reality Press Ltd.